SMART Current Driver/Repeater KFD0-SCS-Ex1.55
- 1-channel isolated barrier
- 24 V DC supply (loop powered)
- Current input/output 4 mA ... 20 mA
- HART-IP or transmitter power supply
- Low voltage drop
- Line fault detection (LFD)
- Up to SIL 2 acc. to IEC/EN 61508
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Technische gegevens KFD0-SCS-Ex1.55
| General specifications | ||
|---|---|---|
| Signal type | Analog input/analog output | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Supply | ||
| Rated voltage | < 30 V DC , loop powered | |
| Power dissipation | 0.2 W | |
| Control circuit | ||
| Connection | terminals 8-, 9+ | |
| Voltage | max. 30 V DC | |
| Current | 4 ... 20 mA (quiescent current < 0.5 mA) | |
| Power dissipation | 150 mW at 20 mA and Uin < 24 V | |
| Field circuit | ||
| Connection | terminals 1+, 2 / 3- | |
| Voltage | ≥ 16 V for supply voltage > 21 V | |
| Current | 4 ... 20 mA (linear transmission 1 ... 22 mA) | |
| Load | ≤ 800 Ω (at 20 mA) | |
| Transfer characteristics | ||
| Voltage drop | see note | |
| Deviation | ||
| After calibration | ≤ ± 80 µA linearity, load and voltage dependence at 20 °C (68 °F) | |
| Influence of ambient temperature | < 0.5 µA/K | |
| Damping | approx. 3 dB | |
| Rise time | ≤ 20 µs at 0 Ω, ≤ 600 µs with 800 Ω load | |
| Galvanic isolation | ||
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
| Indicators/settings | ||
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2007 | |
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | screw terminals | |
| Mass | approx. 120 g | |
| Dimensions | 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2 | |
| Height | 112 mm | |
| Width | 20 mm | |
| Depth | 115 mm | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | PTB 02 ATEX 2064 | |
| Marking |  II (2)G [EEx ib] IIC |
|
| Voltage | 23.1 V DC | |
| Current | 28 mA | |
| Power | 0.647 W | |
| Supply | ||
| Maximum safe voltage | 253 V (Attention! The rated voltage can be lower.) | |
| Certificate | PF 11 CERT 0902 X | |
| Marking | II 3G Ex nA IIC T4 Gc |
|
| Galvanic isolation | ||
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
| International approvals | ||
| FM approval | device with FM approval on request | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210120 |
| ECLASS 12.0 | 27210120 |
| ECLASS 11.0 | 27210120 |
| ECLASS 10.0.1 | 27210120 |
| ECLASS 9.0 | 27210120 |
| ECLASS 8.0 | 27210120 |
| ECLASS 5.1 | 27210120 |
| ETIM 9.0 | EC002653 |
| ETIM 8.0 | EC002653 |
| ETIM 7.0 | EC002653 |
| ETIM 6.0 | EC002653 |
| ETIM 5.0 | EC001485 |
| UNSPSC 12.1 | 32101514 |
Details: KFD0-SCS-Ex1.55
Datasheet: KFD0-SCS-Ex1.55
| Datasheet | Bestandstype | Bestandsgrootte |
|---|---|---|
| Datasheet KFD0-SCS-Ex1.55 | 1109 KB | |
| Fiche de données KFD0-SCS-Ex1.55 | 1092 KB | |
| Datenblatt KFD0-SCS-Ex1.55 | 1089 KB | |
| Datasheet KFD0-SCS-Ex1.55 | 1145 KB | |
| Hoja de datos KFD0-SCS-Ex1.55 | 1118 KB |
Documents: KFD0-SCS-Ex1.55
CAD+CAE: KFD0-SCS-Ex1.55
| CAD | Bestandstype | Bestandsgrootte |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 3048 KB |
| CAD Portal / CAD Portal | LINK | --- |
| EPLAN | ||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | EDZ | 942 KB |
Approvals+Certificates: KFD0-SCS-Ex1.55
| Certificates | Bestandstype | Bestandsgrootte |
|---|---|---|
| Europe PTB ATEX Category (2) G | 6215 KB | |
| Europe Pepperl+Fuchs Certificate of Compliance ATEX Category 3 | 179 KB | |
| South Africa MASC | 209 KB | |
| exida Functional Safety Assessment | 284 KB | |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 82 KB |
Aanverwante producten: KFD0-SCS-Ex1.55
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
|
||||||
|
||||||
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
+31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
+31 73 75 07 108
© 2024 Alle rechten voorbehouden.
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.